On grid solar installation
Solar Panel - Stop compromising the future of our children and the environment. Go solar today!
- Technology :- Bifacial PV Modules MBB P-Type PERC Half-cut 520 – 545 Wp
- Approvals and Certificates :- IEC 61215, IEC 61730, UL 61730, BIS, IEC 61853-1, IEC 62782, IEC 61853-2
- Performance Warranty :- For a period of 30 years
- Make :- Best Companies
DC Power (PV-Module) - Maximum DC power from the PV modules using maximum power point tracking (MPPT) technology
- Maximum DC power from the PV modules using maximum power point tracking (MPPT) technology
- Safety features on both PV system (DC) and grid (AC)-side
- Works with wide AC and DC Voltage Range
- Configurable input PV mode
- Remote monitoring through GPRS / Wi-Fi
- Maximum Efficiency: 98.8%
- Warranty: 5 years
- Make: Best Companies
DC Power (PV-Module) - Maximum DC power from the PV modules using maximum power point tracking (MPPT) technology
- Maximum DC power from the PV modules using maximum power point tracking (MPPT) technology
- Safety features on both PV system (DC) and grid (AC)-side
- Works with wide AC and DC Voltage Range
- Configurable input PV mode
- Remote monitoring through GPRS / Wi-Fi
- Maximum Efficiency: 98.8%
- Warranty: 5 years
- Make: Best Companies
Separate Junction boxes - Junction boxes are made of polycarbonate, which are IP65 rated for outdoor and indoor use
- DC and AC-side separate junction boxes
-
They also house the necessary protection equipment , such as: (+) ve and (–) ve DC terminal fuses,
Surge protection devices (SPD)DC disconnection switch,
Voltage Relay(NVR) with Switchgear for Grid Voltage fluctuation protection - Junction boxes are made of polycarbonate, which are IP65 rated for outdoor and indoor use
Mounting Structure - Solar panels perform best when exposed to direct sunlight. For that to happen, modules get mounted at an angle facing the south.
- Mounting structures are made of hot-dip galvanized mild-steel, designed to last through the life of PV system
- All fasteners are Galvanized in order to avoid any corrosion issues
- Site Specific Structure Design with Aesthetic Value and Shadow free Installation
- Mounting structure is designed to withstand a wind speed of 150 km/hr
Mounting Structure - Solar panels perform best when exposed to direct sunlight. For that to happen, modules get mounted at an angle facing the south.
- Mounting structures are made of hot-dip galvanized mild-steel, designed to last through the life of PV system
- All fasteners are Galvanized in order to avoid any corrosion issues
- Site Specific Structure Design with Aesthetic Value and Shadow free Installation
- Mounting structure is designed to withstand a wind speed of 150 km/hr
